Your cart is empty.
Your cart is empty.Lindstrom 7190 Cutting Capacity: 0.01-0.05 inBevel / Cut Result: Micro-BevelMaterial: High-performance alloy steelPolished and precision induction hardened to 63-65 HRC Micro-Bevel Cut Diagonal Cutter w/Tapered Head The Lindstrom 7190 is a Micro-Bevel Cut Diagonal Cutter with a Tapered Head. It has a 0.01-0.05' cutting capacity for copper wire.It is made of high-performance alloy steel with a polished and precision induction hardened to 63-65 HRC. The precision screw joint minimizes friction and maximizes the alignment of cutting edges. The 7190 has ESD-safe handles in synthetic material with leaf springs. Supreme Series Comparison Table ModelHead TypeHead SizeBevel / Cut ResultCutting Capacity (in)Length (in)Head Height (in)Head Width (in)Weight, g7190TaperedSmallMicro-Bevel0.01-0.054.290.350.35507191TaperedSmallFlush0.01-0.054.290.350.
Wilbur Force
Reviewed in the United Kingdom on February 26, 2025
Great just the job for cutting fine electronics wire but be warned not to try anything too thick or tougher than copper , silver or perhaps gold.
Christopher
Reviewed in the United States on February 13, 2025
Not the same quality, they used to be these things very, very easily not very well made anymore
Jim
Reviewed in the United States on June 10, 2024
These are the best small wire cutters!
Colin bodger
Reviewed in the United Kingdom on November 21, 2024
Replacement pair. Son tried to cut brake cable these are not designed for much beyond component leads
Wallis
Reviewed in the United States on June 24, 2022
I’ve had the same metal clippers for 15 years, I decided to treat myself to a new pair. I bought these, $50, and I barely used them and they broke! I had only cut 21 gauge Sterling wire a few times, then I was clipping some easy sheet solder and THEY BROKEReturned!
nelson landi
Reviewed in the United States on August 30, 2021
Too expensive for bad quality , it broke on the first use cutting a gold wire .
DaveE
Reviewed in the United Kingdom on March 7, 2021
I bought a pair of Lindstrom 7190 cutters last June 2020. I have only used them a few times until February 202I when I was cutting a 1mm silver speaker cable. During this the cutter face snapped off. I have written to the manufacturer but so far I have not had a response. I am very disappointed that such a brand I once held in high esteem does not bother to get back to me. When I bought these I thought that these cutters would last a lifetime not just 8 months with very light use.
Leigh
Reviewed in the United States on March 8, 2020
I have owned a couple of the Lindstom 7190 cutters and have been very pleased. However, the last two I purchased have been disappointments. They do not cut 0.019 in accu-flex wire at the end tips of the cutters, which is necessary for what I do. These are labeled "Lindstrom" in pale gray as apposed to black labeling on previous cutters.
polarbear
Reviewed in the United States on September 22, 2018
When I received it I was doubt if it works since it is so small. I tried it out and it was very sharp and could cut my 16gauge wire easily!!!
Stampy
Reviewed in the United States on December 21, 2018
I am not a professional beader, it’s a hobby for me so I never wanted to spend a lot of money on my tools but I wish I had bought these 5 cheap cutters ago. Great compact size to! Worth the money!!!!
Froggy
Reviewed in the United Kingdom on January 13, 2016
I start to replace all my middle quality tools (bost, magnusson) by the highest quality I can afford. This is an expensive tool, but at least it is made in Europe. In addition it is possible to get some information on the manufacturer website, which is, in my opinion, a great thing.Even if it is a good tool, be careful with the metalic parts. When I say be careful, it mean store this tool in a perfectly dry environment. I use this tools for my hobby which is electronics. My working and storage places are located in my flat with 60% of humidity at 20°C. I can see some small points appearing from the surface of this tool, nothing to worry about, but think to use a proper grease with this tools and store it in a dry place.Excepted for the verrrrrrrrrrrrrrrrryyyyy small problem of rust (I am a perfectionist), this is the first time in my life I have a tool with this cutting quality. Really, if you need to use this kind of tools, for e.g. cutting some pins, just buy it.I have downloaded three images, on the close up you can see the very small amount of rust. On the others images you can see the quality of the tool and the parallelism of the cutting edges. It is a nice work !Sorry for my English, I am a french person which try to do his best in writing.
sue martin
Reviewed in the United States on May 8, 2014
I use the cutter to remove diamonds and colored stones from gold jewelry. The sharp points let me snip prongs without damaging the stones. With all the work I do I wear them out within one month but they are the best cutters I have found.
Mrs Maggie R Thompson
Reviewed in the United Kingdom on October 31, 2014
Fantastic product and well worth the money. A workman is only as good as his tools and these are good.
Recommended Products
$60.69
$ 26 .99 $26.99
$137.13
$ 66 .99 $66.99