Shopping Cart

Your cart is empty.

Your cart is empty.

F550 NPF Battery Adapter Plate, Type C, USB A and D Tap 3 Output, Type C Fast Input, 4 Indicator Lights Battery Adapter Plate for NP F Series Batteries

Free shipping on orders over $15.00

$32.99

$ 16 .99 $16.99

In Stock

About this item

  • SUPPORT 3 OUTPUT INTERFACES: Support Type C, USB A and D Tap, Type C fast input interface, fully compatible with different devices, can be used for phones, tablets, laptop, BMPCC 4K 6K cameras, digital cameras, LED fill light, monitors, NPF battery charging.
  • FULLY COMPATIBLE: The battery adapter plate is compatible with NP F series batteries, using pure copper metal contacts, good conductivity and stable output.
  • 4 INDICATOR LIGHTS: Easy to check the charging status; can directly the battery; easy to use, plug and play, lightly press the black self‑locking , the battery can be quickly disassembled.
  • MULTIPLE : PC fire retardant material, and at the same time realizes fast charging, with overcharge, overcurrent, overvoltage, overtemperature, short circuit , and
  • WITH 1/4IN SCREW HOLES: It is suitable for different installation scenarios. Small size, easy to carry out, to provide you with a better power solution.



Product Description

NPF Battery Adapter Plate
NPF Battery Adapter Plate

Fully compatible with different devices, can be used for phones, tablets, laptop, BMPCC 4K 6K cameras, digital cameras, LED fill light, monitors, NPF battery charging.

NPF Battery Adapter Plate

Support Type C, USB A and D Tap, Type C fast charge input interface, Easy to check the charging status; can directly charge the battery; easy to use, plug and play.

NPF Battery Adapter Plate
NPF Battery Adapter Plate

Specification:

Item Type: NPF Battery Adapter Plate

Material: PC

Gross Weight: 140g / 4.9oz

Interface: 1/4in screw hole

Applicable Batteries: For NP F series batteries, such as NP F550 F570 F750 F770 F930 F950 F960 F970, etc.

Type C Input: Charging power up to 22W (PD: 12V), support PD, AFC, QC and other protocols; the charging indicator flashes, and the light is always on when fully charged

Type C (PD) Output: 5V 2A, 9V 2A, 12V 2A

USB A Output: 5V 2A

D Tap Output: 5A maximum

Example of Fast Charging Time:

F550: Fully charged in 78 minutes

F750: Fully charged within 120 minutes

F970: Fully charged within 200 minutes

Package List:

  • 1 x Power Base
  • 1 x Manual
  • 1 x USB C charging cable
  • 1 x USB A Charging Cable

Mr. Adams
Pros:- Seems to give steady power even when plugging/unplugging the input power, so this should work as a UPS for something like a Raspberry Pi 4 or Mini-PC. (I don't know how hard this usage would be on the batteries, though, so maybe stick to cheap, low-capacity ones if this was the plan)- Smaller than a USB battery bank and mountable via a 1/4" screw.- Does not appear to have a low-draw automatic cutoff like most power banks will do. I had a shut down mini-pc plugged in for a few hours (so the only draw was the standby LED) without it cutting off power to the USB port. Probably another thing not great for the attached battery's longevity, but really nice if you're trying to power, say, an Arduino in a remote location that spends most of its life in sleep mode but wakes up periodically to send data.Cons:- Item itself is branded ZGCINE, not VBESTLIFE or unbranded as in the photos. I'm guessing it's not a counterfeit, but still kind of suspicious.- I suspect the output for 12V PD is 1.5A (as is listed in the ZGCINE listing of this same product) and not the 2A as listed here. When running a Mini-PC (which supposedly maxes out at 25W draw), it seemed to peak at about 18W draw when doing some gaming, powering a portable monitor, and charging a set of bluetooth ear buds.- Does not appear to support hot-swapping batteries. Removing the battery severely limits the power output passed from the input to the output beyond the minimum required to power things.
Joel Sasseville
Reviewed in Canada on September 29, 2024
Je l’utilise avec ma Sony a6100 parce que j’étais déçu des mauvaises performances des batteries avec ma caméra. Je peux maintenant utiliser des batteries NP-F750 pour faire de la vidéo sans soucis. Ma seule critique serait de fournir un adaptateur pour visser la plaque à la caméra. Pour le reste, je recommande.
Christopher
Reviewed in Canada on July 8, 2024
i wish it had a 7v output. but otherwise working great.
G. Jackson
Reviewed in the United States on June 17, 2024
It does what us supposed to do and does it quite well. The battery meter is very helpful as it tracks the juice in your unit. the device has a built-in D-Tap, usb-a, and uscb-c ports. This is great as you can use a splicer to add more ports. Wonderful product. Amazing functionality for the price.
Colin C
Reviewed in Canada on October 11, 2024
I have a portable video camera rig that includes a 7" monitor, and I was in need of a reliable power source to connect via D-Tap. After some searching, I found this power plate, which, although a bit pricey, ended up being the perfect solution for my setup. It provided a consistent power supply, ensuring that my equipment remained functional during shoots, which greatly enhanced my overall filming experience. Plus, its robust design made it easy to mount, allowing for a seamless integration into my existing rig. Overall, investing in this power plate was worth it, as it addressed my needs efficiently and effectively.
Media Chaps
Reviewed in the United States on November 19, 2023
Well worth it. Charge my fujifilm xh2 and the monitor simultaneously