I realize there are already almost 400 reviews for these flash units and mine will most likely get lost in the flood but I just wanted to weigh in on what makes them so awesome.First of all I have used Canon Speedlights in the past, still own a 430EX that sits in a box and collects dust.I really don't like using ETTL as I find it rarely gives me the kind of exposure I like in my photo's. I personally feel it looks flat and unprofessional so this review will be based on manual functions. This unit doesn't have a TTL function anyway so... on to the review.I have been using Yongnuo flashes for about 3 years now and I honestly have no gripes. None at all. Especially now that I've upgraded to the IV models and get the added wireless functionality built in.I dropped a 560III model about 4 feet onto the concrete a couple years back and the bottom of it broke off. It actually kept working for a full 2 hour shoot after that before it blew out completely. Probably due to some shorts after wires coming loose. But that just speaks to the durability of the Flash.Here's the thing, at this price, I was not upset. I dropped a Speedlight onto the concrete, watched a chunk of it fly off and thought, "Darn... well I guess I need to buy another."Try having that mentality with a Canon or Nikkon Speedlight.I take these hiking, out on major event shoots where I'm running around bumping into stuff, sometimes outside and getting rained on etc. etc.I never worry about breaking one because I know I can afford to grab another. It's a freeing feeling. I worry enough about my camera and my lenses as it is.Here's the other reason I love these.While I have a master controller for my speed lights, I prefer to use my flash in manual mode even when it's attached to my camera or on a trigger. On the Canon speed lights switching power while in manual mode takes a few extra clicks and requires you to depress the tiny center button first to let the unit know you want to start changing power level. It drives me a bit crazy now that I'm used to these.With the Yongnuo in manual mode, you just click one side or the other on the interface and your power level changes by standard stops. Click up or down to change power in smaller increments.I can get the exposure I want so quickly with these now that I really don't understand why Canon chose to design theirs differently.The wireless works well with the YN560-TX master controller though my shutter speed needs to drop to about 160 to avoid shutter shadow.They work flawlessly with the RF-603CII-C1 triggers.The power is also definitely up to par. Just one of these is enough to light up a medium-sized room with some bounced light.I have 3 (still less $$ than 1 canon) and dial them in at different levels for a better effect but have gotten by with 2 in very large rooms and been happy with my results.I've used them on both a t2i, t3i and a 6D and have friends who use them with 5D MarkIII's and love them just as much.If I had to pick one thing I don't like... I guess that they heat up and delay quickly. If you are firing off shot after shot the batteries get hot quick and the unit will force a delay until they cool down. You can attach an external power pack to eliminate the problem but I have learned to just work around it. I'm a bit more intentional with my shots anyway so I'm not one to just blast away, spray and pray style.I'd say I can get about 8 minutes of continuous shooting, full power, at maybe a shot per second before I start experiencing delays.You should also consider the speed, if you need to shoot at High Speeds like 250+ then these will not work. If you're using a controller you may even need to drop down to 160.Beyond that, no issues.Again, if you like automatic exposure and using the TTL or ETTL functions then this is obviously not for you since it doesn't offer that functionality at all. But if you use manual adjustments with your speed lights or you use a master controller then these are not only up to the job but they are incredibly affordable meaning you can have multiple flash units on standby if one gets broken.Really can't recommend them enough. I've bought 5 so far, broke one 560III and gave the other away once I got my IV's.I plan to buy a few more as backup and can happily say that I feel confident in my purchase.

I have been using Yongnuo 560-II and 560-III for quite some time for their power and simplicity of use in the studio.The -II I used with YN603 and procured a pair of -III when I needed more flash since they feature the 603 receiver.Last time I needed to expand my pool I came across these YN560-IV and lo and behold not only do they feature the 603 receiver, they also feature the emitter and even better they allow to adjust remotely the power and the zoom of the other -IV but (great surprise!) the -III as well.(At the same time Yongnuo came up with their YN560-TX which allows for simple remote control of up to six independent groups of 560-III and -IV in a way even simpler than with the -IV. I reviewed it separately.)Triggering modes:* Hot-shoe - that's when the flash is on your camera.* Rx - The flash is triggered remotely by a YN602, YN603, YN560-TX or another YN560-IV* S1 - Synchro on the first flash it sees - useful if you are using a small manual flash on your camera to trigger your other flashs* S2 - Synchro on the second flash it sees - great if you are using a TTL flash to trigger your setup. That can be an external TTL flash on your camera (e.g. Canon 580ExII or 430ExII) or your camera popup flash.* Tx - This mode is not available on the YN560-III, only on the 560-IV reviewed here: the flash controls the other flashs in the room as long as they are on the same channel.A note about S1, S2 and the optical TTL mode of Canon flashs:As noted above, S2 is useful for light-triggering a Yongnuo flash from a TTL flash - however this does not work well when using optical control of a remote TTL flash such as the 580ExII or the 430ExII from either a 580ExII mounted on your camera or the popup flash of some of the more recent Canon cameras such as the 7D, 70D or 7DmkII. In that case the master flash communicates with the remote flash using bursts of light that get counted by the S1/S2 synchro mode of the optical manual slaves and they trigger on the TTL measurement burst instead of the actual picture illumination flash.I could get them to work nonetheless by making sure that only the Canon slave flash(s) could see the master flash and that the YongNuo flashs are set on S2 and also see the Canon slave flashs but not the camera and the master flash - but this gets complicated and is prone to failure. In that case, unless you really need the remote TTL capability, I would go for the YN560-TX or a YN560-IV to control the setup.In addition, don't give your older YN603 away: they can trigger the 560-TX remotely and they can be controlled by it or by the -IV to trigger any other flash including YN560-II, Canon 580ExII or studio monolight (using a small, inexpensive PC sync cord). Of course these are only manual in that case and cannot be adjusted from the camera position, plus they always fire when the -TX shoots.I could probably have done as well with just the YN560-TX and additional YN560-III instead of the YN560-IV if these were more expensive but the current going price for the -IV is slightly lower than that of the -III so why bother?[Edited the same day: I see the -III is now $5 or $6 lower than the -IV. In that case it makes sense to get one or two -IV (for backup) or a 560-TX, and a few -III for the rest.]As a first test I attached a Brunca mask onto a stand (see the picture somewhere on that page), two -IV with red gels on Justin Clamps ot that same stand facing opposite: one towards the black side of a reflector used as a backdrop and one aimed at a piece of paper jammed in the mask, plus one -III on a stand at camera right, in front of which I held a simple sheet of white paper as a diffuser. I did not even take a softbox out for that picture.All in all a few YN560-IV are all you need for strobism in manual, possibly with a YN560-TX and, if you can afford it, a small flash meter.

Ürün iş görür

ポートレート撮影で人物の後ろにこの商品を置いて撮影することによって、人物を浮かびあがらせるような撮影ができる。

Very happy so far with the items, very quick delivery

Pour le prix c'est un super flash.Semble costaud même si tout en plastique.J'aurais aimé avoir la possibilité de le mettre en 1/250 mais on est limité a 1/125 max. La rotation de la tête semble costaud aussi donc pas de soucis pour mettre des accessoires assez lourds sur la tête du flash.

Very quick delivery.The Flash YN 560 IV is working fine with my Sony a6000. No problem whatsoever related to hot shoe compatibility as mentioned in many forums and on you tube. This works perfectly fine on Sony a6000, without any modification to hot shoe or playing with flash, it fits in nicely. Flash fires in M mode from Hot Shoe (I haven't tried multi mode as I don't use it, but it should work there too). I also triggered an age old Fuji Starblitz 3600 in slave mode with it. With Sony a6000 built in flash, I used YN 560 IV in slave (S-2 setting) and it fired correctly. The Flash is great value for money.