Your cart is empty.
Your cart is empty.From the manufacturer
The Lewmar Anchor Range
Epsilon Anchor
Lewmar's new Epsilon anchor builds upon the iconic Delta anchor's robust design and overall quality. Available in both manganese steel for the galvanised version and 316/2205 duplex steel combination for the stainless version. This new anchor is fully compatible with Lewmar bow rollers and is available in a range of sizes.
LFX Anchor
The new LFX anchor has been developed to complement our existing range of anchors, offering a stylish and practical design. The LFX features large alloy flukes to ensure high holding power at a greatly reduced weight. Foldable for easy stowage, the LFX is an ideal solution for smaller vessels
Delta Anchor
The Delta anchor is constructed of high-grade manganese steel and duplex stainless steel for maximum tensile strength. Its unique shank profile and ballasted tip make it self-launching, and its low center of gravity and self-righting geometry ensure that it will set immediately.
DTX Anchor
Lewmar’s DTX anchor fills the gap between the galvanised and stainless Delta anchors, allowing boat owners to choose a stainless anchor. The DTX brings the improved aesthetics and anti-corrosion qualities of stainless steel anchors to the mass market
CQR Anchor
The CQR anchor has gained a reputation for its superior performance. The original drop-forged construction of the CQR anchor increases its strength and reliability under load. Its hinged shank delivers consistent setting and holding even in the very worst conditions.
Claw Anchor
Design based on anchors used to secure oil rigs in the North Sea. The Claw anchor is constructed of high-grade galvanized or stainless steel cast in a single piece. It sets effortlessly, holds in a variety of seabeds and stows easily on the bow roller of most boats.
LFF Anchor
Being a lightweight simple anchor, the LFF anchor is a strong secondary anchor to have on-board. A folding design provides simple stowage and different anchoring possibilities.
Kedge Anchor
Our Lewmar Kedge anchors are available in a range of sizes and galvanized or stainless steel. For larger yachts, the Kedge anchor is seen in twin, through-hull installations.
George E. Robertson
June 19, 2025
I am using this to anchor one of Doug Hylans Oonagh design 11'-8: X5'-0" lug rigged Rowing or sailing dinghysThe Lewmar's holding power in mud or sand is 360Lbs and it fits in a small cloth bag along with 8 ft of chain and 50" feet of nylon rode. The bag fits comfortably in every one of my boats five under seat stowage compartments with a lot of room to spare even in the smallest one, It should be adequate for 99% of the situations where I imagine my self anchoring and i can always add on a mooring line for the 1% situation where in need 100 feet of rode.
Andy
June 9, 2025
I bought this for an inflatable 11ft zodiac that I am using to fish the saltwater flats. I had a 10lb mushroom that didn't hold the boat. This one, much much lighter, is the real deal. It digs in and it stays put. I added a 4 ft chain from walmart, and the whole system is perfect.
Customer
May 5, 2025
Good
Dennis J. La Frinere
February 23, 2025
There will never be quality like a real Bruce anchor when they first came out. One of my 33s, and I have two, bent at the shank. It's not a bad Bend but it's still bent I never had a real brand name Bruce do that but for the price? Well worth it and the bend in the shank doesn't stop the anchor from holding but it does tell me that the quality is less than a real Bruce I'd say go ahead and buy it it's a good anchor
Cris Counts
January 8, 2025
You will need to drill out the clasp hole to attach a chain properly to the head.
BergFam
November 25, 2024
Perfect for sandy bottom kayak fishing. The bell type anchors don't hold in sand so this worked much better keeping my fishing kayak in place in windy conditions
Dave
October 31, 2024
After struggling with a grappling style anchor for a few months on my waverunner, a friend recommended this style anchor to me. It's perfect! I'm always anchoring in sand (no roots, rocks, etc), and I can't miss with this anchor. I can chuck it and it bites every time. In sand, I have experience with many types of anchors (richter, fluke, mushroom, grappling). The fluke (or danforth) is also a great choice, but for the small size I need, they don't work nearly as well as this claw anchor. I use a fluke for my 21' bow rider. A larger version of this anchor would probably work great for that, but it won't fit in my boats anchor locker due to its bulky shape.
Steven Imbimbo
October 21, 2024
The design of this anchor really works well at the sandbar
Recommended Products
$169.99
$ 73 .99 $73.99
$57.81
$ 28 .99 $28.99