Your cart is empty.
Your cart is empty.
This Apache 98108520 fuel transfer hose assembly has a 3/4" inside diameter (ID), is 15' long, and is suitable for transferring gasoline with up to 15% ethanol, diesel, kerosene, or oil in manual pump or gravity flow dispensing operations. The hose has a nitrile synthetic rubber tube and cover for resistance to oil, abrasion, and weathering, and is reinforced with spirals of synthetic yarn for strength. It is not recommended for use with biodiesel. The assembly includes two factory-installed 3/4" male National Pipe Taper (NPT) threaded fittings for attaching the hose to couplings or equipment, and each end has an 8" internal strain relief spring to prevent kinking at the coupling. This fuel transfer hose assembly is suitable for dispensing gasoline with up to 15% ethanol, diesel, kerosene, or oil with low-pressure dispensing pumps, barrel pumps, or from gravity storage tanks.
Industrial hoses transfer or convey air or liquid in hose systems. When selecting industrial hoses, use the STAMPED method to help determine the type of hose needed: S = Size (ID, OD, and length) T = Temperature (maximum and minimum temperatures of material being transported) A = Application (industry or process) M = Material (to be conveyed, type and concentration) P = Pressure (maximum working pressure) E = Ends (type of end connectors or couplings on hose) D = Delivery method (volume and velocity)The inside diameter of the hose must be adequate to keep pressure loss to a minimum and avoid damage to the hose due to heat generation or excessive turbulence. The hose must be capable of withstanding the minimum and maximum temperatures that occur within the hose system. Some applications require specialized oils or chemicals to be conveyed through the system. In this case, hose selection must ensure compatibility of the hose tube, cover, couplings and O-rings with the fluid used. Industrial hoses are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.
Apache manufactures belts, hoses, and other molded rubber products. The company, founded in 1963, is headquartered in Cedar Rapids, IA.
Terry T
Reviewed in the United States on May 10, 2023
It's a gas hose.. I used it on a gas barrel.
M
Reviewed in the United States on May 3, 2021
Works great, stays flexible even when it's cold
Jerry Buchart
Reviewed in Canada on March 9, 2021
Received today, was well packaged. A little lighter than the one I replaced, will know more in regards to how it stands up to weather and sun in a shot time. Other than that looks good.
MKaiser
Reviewed in Canada on February 18, 2021
So far so good..holding up to oil
Craig Freeman
Reviewed in the United States on December 31, 2021
Everything is good
Michel
Reviewed in Canada on October 4, 2021
Tuyau plutôt mou, pour usage avec pompe manuelle, se plie facilement et réduit la quantité de fluide qui passe..
John Carll
Reviewed in the United States on October 2, 2020
5 months after being installed, coiled up and stored inside the outter rubber is already cracking and splitting
GlennC
Reviewed in the United States on September 12, 2018
The media could not be loaded.
Customer
Reviewed in the United States on March 8, 2018
Good price for the length of hose and quality. The crimps on the fittings are good.
Recommended Products
$76.25
$ 34 .99 $34.99