Your cart is empty.
Your cart is empty.FLEXTRIM Flexible Base Cap # WM163 (CM163): 11/16" Thick x 1-3/8" Tall - 12' feet Long Conventional woodworking tools can be used with this material. Always install moulding in a relaxed position. Use construction or panel adhesive continuously on the backside and nails to secure moulding in place until adhesive bonds. Remember – do not use staples to fasten material, keep nails to a minimum (no closer than 6 inches between nails), and do not nail closer than 3/8 inch from edge of moulding. Flex Trim is stable and will not absorb moisture and is ideal for humid environments. It is not affected by heat or cold and can withstand extreme environments. ALWAYS lay out the material to let it relax back into its original shape; this is a good time to double-check molding style and application. NEVER pre-finish the material prior to installation. The material may flex during installation and cause fractures in the finish. ALWAYS make certain that the surface you are applying the material to is flat and smooth. Flexible molding will follow any irregularities in the surface. NEVER use staples or nails with large heads. Keep nails to a minimum and away from edges to avoid "bumps" at the edge. ALWAYS use a construction adhesive in conjunction with (or in lieu of) nails or screws. This will ensure a quick and easy application and a cleaner finished look. Warm up to at least 70 degrees for maximum flex.
Antcov
Reviewed in the United States on March 9, 2025
Went up easy. Looks good. I used these on some 19-in columns for collar trim.
Just Us
Reviewed in the United States on November 10, 2024
Went perfectly around a piece of wall art we put in our home. Painted up extremely well to match wall.
George
Reviewed in the United States on October 7, 2022
Product performed well and did the job nicely
Mike
Reviewed in the United States on October 18, 2021
Size matching, quality good
Seth Meeks
Reviewed in the United States on January 27, 2021
Perfect and easy to work with
Recommended Products
