Shopping Cart

Your cart is empty.

Your cart is empty.

AC Voltmeter Ammeter 80-260V 100A KT-D135 LCD Display Digital Volt Amp Meter Wattmeter Energy Gauge with Current Transformer CT

5.0 Write Review
Free shipping on orders over $15.00

$30.46

$ 12 .99 $12.99

In Stock

About this item

  • Small Size , can be mounted to different place. Made from high quality ABS, small size with 8×5.5×6.5 cm, about 150g, only your palm size and suitable for all kind of place.
  • Display Current Voltage Active Power Energy at the same time, with LCD blue backlight, Can be turned on/off manually.
  • AC voltmeter 80-260V, AC meter 0-100A, Active power 0-22 kW, electric energy 0-9999kwh, please do not exceed the rated parameters.
  • Multi Functions: Reset energy; Power overload alarm setting function; Power-down data storage function; Backlight on/off function.
  • This voltmeter is easy to connect, it is suitable for indoor, please don't use outdoor. Please connect according to the wiring diagram. This product is not suitable for inverter, unless you have tested that the waveform and frequency of the inverter are exactly the same as the mains, and there is no excessive glitch interference. This voltmeter cannot be used in autotransformer, thyristor circuit or load.


Product Description

This meter can only be used with single-phase AC power. And it can only measure the active power(real power), no Apparent power.

Test Range: 1. Working voltage: 80 ~ 260VAC

2. Test voltage: 80 ~ 260VAC

2. Rated power: 100A / 22000W

3. Working Frequency: 45-65Hz

4. Measurement accuracy: 1.0

Button Description

Button

Button Description

1. The backlight control

By short press the button to turn on or off the backlight, the backlight status automatic storage.

2. The power cleared

Step 1: Press the power button 5 seconds until the digital display window flashes, then release the button;

Step 2: If you press the button again, the consumption data is cleared and cleared quit flashing;

Step 3: If you press the button again 5 seconds long until no flashing, the charge data is not cleared and exit cleared.

3. The power to set the alarm value

Step 1: Press the button, when the LCD screen display "SET CLr" after the release button, set the value into the power status report;

Step 2: Power area displays the current value of the power alarm and the lowest digit starts blinking, then you can press the button of the digital +1, when there is no key operation more than three seconds, automatically switches by short digital set as above;

Step 3: After setting, press the button more than five seconds to automatically save and exit, the scope of active power threshold set for the 0.0 ~ 22.0kW.

Wire Connection

Wire Connection

Cautions

1. Please make sure the AC input is Pure Sine Wave.(Municipal electric power is pure sine wave). Please don't use the meter to measure AC power converterd from a DC-AC inverter UNLESS you can make sure the output from your DC-AC inverter is Pure Sine Wave. This is very importatnt.

2. Applied load should not exceed the rated power.

3. Wiring order can not be wrong.

4. This module is suitable for indoor applications, please do not use outdoors.

Package includes:

1x AC Power Multimeter

1 x English Instruction